How I prepare for a physical exhibition?

Prints drying in my darkroom
Silver Geltatin Prints drying in my darkroom

I have been busy the last few days getting my prints ready for my next upcoming exhibition.
The Exhibition entitled ‘Thanks Pandemic’ consists of 24 silver gelatin prints framed and matted.
All up the print finishing took about 12 hours. I don’t recollect how long the actual printing took, as it was done some time ago during several of the lockdowns that Victoria endured from 2020 to 2022.
These lockdowns were the catalyst for me to revisit my archive and print some images that I have always wanted to print. Now with time on my side and changes to materials I was able to produce a series of prints that reflect my skills and knowledge. Basically I like to make work with long tonal scales. This is made possible by using 2 filters under the enlarger, the 00 filter and the 5 filter, from Ilford’s filter pack. Using this technique enables finer control over shadows, midtones and highlights.
After the prints are made they undergo treatment for archival permanence using a 2 bath fixer system and using some dilute selenium toner. In this case it was 1:19 for 3 minutes in the selenium.

My toning setup
My toning setup, I’m using selenium toner 1:19 for 3 minutes

Then into my archival wash tub for one hour. My tub holds 10 prints so I had to undertake this process in 3 batches, 2 at 10 and one at 5 prints. They are then hung to dry in my darkroom.

My archival print washing setup
My archival print washing setup, washed 10 silver gelatin prints at a time

Next I flatten the prints in a warm heat press.
Once they are all flat, I begin the final stages of preparation for matting.

Flattened prints ready for over matting
Flattened prints ready for over matting

This involves making paper corners, 100 in total, then attaching the prints to a backing board that is hinged to the matt. All made using paper archival tape.

Archival paper corners
Archival paper corners, I made 100 of these.

Once the components are assembled the frame is reassembled and the protective corners replaced. Then they are stored ready for transport to the gallery.

A print matted and secured to the backing board, ready for the final touches to make it exhibition ready.
A print matted and secured to the backing board, ready for the final touches to make it exhibition ready.

This body of work is going to use a mixture of frame colours 9 silver 9 off-white and 6 black. How they are how together will be determined once the work is in the space.

All the prints ready for transport to the gallery next week.
All the prints ready for transport to the gallery next week.

About the author.
Stuart Murdoch is an Artist and Part time Photo Educator, with over 30 years of teaching experience. He contemplates many things photographic. His ruminations include his own work as well other’s and the aspects of technology that impact on the sharing and consumption of Photographs.

☛ Website | Flickr | Instagram | Photography links | s2z digital garden | Tumblr

Author: s2

artist, picture maker, photobook creator

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.