I have been busy the last few days getting my prints ready for my next upcoming exhibition.
The Exhibition entitled ‘Thanks Pandemic’ consists of 24 silver gelatin prints framed and matted.
All up the print finishing took about 12 hours. I don’t recollect how long the actual printing took, as it was done some time ago during several of the lockdowns that Victoria endured from 2020 to 2022.
These lockdowns were the catalyst for me to revisit my archive and print some images that I have always wanted to print. Now with time on my side and changes to materials I was able to produce a series of prints that reflect my skills and knowledge. Basically I like to make work with long tonal scales. This is made possible by using 2 filters under the enlarger, the 00 filter and the 5 filter, from Ilford’s filter pack. Using this technique enables finer control over shadows, midtones and highlights.
After the prints are made they undergo treatment for archival permanence using a 2 bath fixer system and using some dilute selenium toner. In this case it was 1:19 for 3 minutes in the selenium.
Then into my archival wash tub for one hour. My tub holds 10 prints so I had to undertake this process in 3 batches, 2 at 10 and one at 5 prints. They are then hung to dry in my darkroom.
Next I flatten the prints in a warm heat press.
Once they are all flat, I begin the final stages of preparation for matting.
This involves making paper corners, 100 in total, then attaching the prints to a backing board that is hinged to the matt. All made using paper archival tape.
Once the components are assembled the frame is reassembled and the protective corners replaced. Then they are stored ready for transport to the gallery.
This body of work is going to use a mixture of frame colours 9 silver 9 off-white and 6 black. How they are how together will be determined once the work is in the space.